Enabling GPS
The CI-110 software will automatically record your current GPS position with measurements when the GPS device built into the handle of the CI-110 is connected. For more information, see the Location section of this manual.
- Click the drop-down list and select Location.
- The GPS on-board the CI-110 software will automatically search the system for a GPS device and automatically connect to it if satellites are available.
The CI-110 software will attempt to re-connect the GPS every time the application starts after the first connection is established. It may take 10-15 minutes to establish a connection with the right number of satellites the first time the CI-110 is used in a new location. During the time the CI-110 is allowed to search for satellites, it should be outside or near a window for the fastest results**.