Wireless SD Memory Card Operation
These instructions are meant to accompany the instructions supplied by the vendor for Toshiba FlashAir™ W-03 to use specifically with the F-920 Check It! Gas Analyzer, which can be similarly applied to other Felix Instruments products.
- Install FlashAir™ Wi-Fi card software appropriate to the SD card.
- Visit https://www.toshiba.co.jp/p-media/english/download/wl/software02.htm to download the software for configuring the Wi-Fi card and obtain vendor operation instructions.
- Insert the Wi-Fi card onto a personal computer (PC).
- Open the “FlashAirTool” on your PC to configure the SD card.
- Follow the configuration instructions prompted by the “FlashAirTool”.
- For additional guidelines, access the “Help” menu inside the “FlashAirTool” software.
The Wi-Fi card can be enabled in “internet pass thru mode”, outlined in the following documentation provided within the FlashAirTool software:
Go to Network Settings on the main menu
Check Internet pass thru mode
This function is available for FlashAir™ W-03 and FlashAir™ W-02 (Ver. F19BAW3AW2.00.02 or later) cards.
When this function is enabled, the FlashAir™ card can be used like a router, by allowing another access point to be connected via the card.
When an internet access point is connected, images stored on the FlashAir™ card can be viewed, and the internet can also be accessed.
This is convenient when, for example, uploading image files downloaded form a FlashAir™ card onto social networking services, as there is no need to change the Wi-fi device network settings on your smartphone.
- CAUTION: If you want to connect to the internet without using the internet pass thru mode, the wireless LAN setting connection on
your smartphone or other device must be changed from the FlashAir™ card to the internet access point.
Check the “Enable internet pass thru mode” checkbox to enable “internet pass thru mode”.
- Access Point SSID
Sets the SSID of the internet access point.
Enter the SSID for the access point that you will use. An SSID of up to 32 alphanumeric characters can be entered.
- Access Point Password
Set the internet access point password.
Enter the password for the access point that you will use.
- In your browser, enter http://flashair to view or stream your files
For more information on the Toshiba FlashAir™ W-03 Wireless SD Memory Card, contact the application vendor at https://www.toshiba.co.jp/p-media/wwsite/contact.htm.