Installing the F-950 Driver

  1. Launch F-950_Package_Setup.exe.
  2. Set up device by powering on the F-950 and connecting it to computer via USB port. Go to Setup>Mode>USB menu and select Virtual COM.
  3. Install will prompt for DfuSe tool (required for firmware upgrade).
  4. Click Next, then enter your information into the window below. Click Next in the next several steps.
  5. If Windows prompts the following message, select “Install this driver software anyway”:
  6. Device drivers and Software package installation is completed. Under Windows’s Start menu, you should be able to find shortcuts for Device’s Controller and Firmware Upgrade Program.
  7. F-950 Controller software requires Java runtime environment. Installer will check for appropriate version on your computer. Please download and install Java at http://www.java.com/ if requested.

results matching ""

    No results matching ""